..one stop store for your needs
delivering trust

NFC Temperature Logger 1 Year, 48000 Measurements

Product Code:14008

NFC Temperature Logger, reusable, last 1 year and holds 48000 measurements. Alarm indication. Easy setup and download via NFC wireless communication to any enabled Android Device or by using the Windows/USB Interface.

Key Features

NFC (Near-Field Communication) Wireless Interface
High Precision, Alert LED's, Affordable, Waterproof
Measurement interval From 10 sec to 2 hours
Memory capacity: From 5,000 to 48,000 measurements
Autonomy of battery: From 36 days to 1 year

Compact 8-segment LiDAR sensor module

Product Code:12032

Compact 8-segment LiDAR sensor module leverages powerful class-1 laser illumination and 8 independent active detection elements into a single sensor, resulting in rapid, continuous and accurate detection and ranging of objects in the entire wide beam, without any moving parts.

Key Features

Can detecting targets up to 215 m
Weighs only 75 grams
Available in 3 horizontal (20/48/100 deg) and 2 vertical (0.3/3 deg) FOVs
SPI or USB-CAN-Serial interfaces
Module comes with the SDK


Kestrel 5500 Pocket Weather Tracker

Product Code:11003

The Kestrel 5500 Pocket Weather Tracker is a complete weather instrument, offering instant and accurate measurement of wind speed,temperature, humidity and barometric pressure and numerous other derived functions.

Key Features

Functions: Wind Speed & direction,Crosswind and many more
High accuracy & Wide operating range
User-replaceable, impeller
Available with Bluetooth LiNK & Vane Mount



FLEXIBLE SOLAR PANEL - 18W

Product Code:15009

These solar panels are made from world's highest efficiency solar cells from SUNPOWER, USA. They are available in 3W to 300W and can be easily attached to anything such as roof of campervan or boat, etc.

Key Features

Uses Sunpower, USA Back contact cells( efficiency above 20% -25%).
Module efficiency 30% higher than conventional solar panel
Waterproof Connection box
Bend rate from 10-120 degree
3mm thin, super lightweight


Solar Data Logger

Product Code:14007

Solar data logger is used to check PV (photo voltaic) installations. It can record solar irradiation, DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy installation.

Key Features

Records Solar Irradiance, 0-1500W/m-2
PV system output Vdc to 300V, Idc to 100A
Monitor charging circuits, PV (photovoltaic) cell, DC motor, and many other application
Supports up to 300 days continuous recording



EXTREMELY HIGH TEMPERATURE HEAT FLUX SENSOR

Product Code:12050

The sensor is fabricated solely from high temperature materials capable of extended operation at temperatures up to 1000 °C.This is a highly specialized sensor meant for high-level combustion research and spacecraft reentry

Key Features

Operation at temperatures up to 1000 °C
Applications in Combustion R&D & Fire Research
Sensing Area: 56 mm2




Flexible Etched Foil Heaters

Product Code:21003

Flexible heating elements-Silicone Rubber Heaters, Polyimide Film Heaters- have a wide range of industrial, commercial, and military applictions where reliability, cost of effectiveness, minimum cross section, resistance to deterioration and basic flexibility

Key Features

Available in different sizes and shapes
Available in different resistances
Available in AC or DC configurations
Available with or without PSA



Arduino Due - Genuine

Product Code:14023

Based on Atmel SAM3X8E ARM Cortex, Arduino Due is the first Arduino board based on a 32 core microcontroller with 54 digital IOs, 12 AIs, 4 serial ports, a 84 MHzOTG capable connection and many more

Key Features

32 bit core, that allowsoperations on 4 bytes widedata within a single CPU clock.
CPU Clock at 84Mhz
96 KBytes of SRAM
512 KBytes of Flash memoryfor code.
a DMA controller

LVDTs: Range from 1 mm to 300 mm

Product Code:12046

These AC/DC LVDTs are the most economically priced displacement transducers. Housed in stainless steel body, they are a combination of ruggedness and high performance.

Key Features

Non-linearity error as low as 0.3 %
Rugged SS Body, Diameter: 22 mm
Free/Spring loaded Core
Signal Conditioning & Other accessories available
Very Ecomical, but superior performance


LARGE SURFACE AREA HEAT FLUX SENSOR WITH ENCAPSULATION

Product Code:12049

Economically priced, yet highly reliable heat flux sensors. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc

Key Features

Available in various other dimensions
Very economical compared to other sensors in world market
Excellent Sensitivity
Compatible data loggers also available



Power Supply, programmable, triple channel

Product Code:11009

Programmable power supply, equipped with front panel programming and real-time waveform display functionality, has three independant and isolated outputs

Key Features

Independent triple outputs: 30V/3A*2, 2.5V/3.3V/5V/3A*1, total 195W power
High Resolution upto 1mV/1mA
4.3 inches truecolor TFT-LCD display
Three output modes: independent, series and parallel
Save/Recall 5 group system specifications


6.5 digit DIGITAL MULTIMETER

Product Code:11001

This multimeter gives reliable, cost effective, full DMM capabilities measuring DCV, ACV, DCI, ACI, Resistance (2 & 4 Wire), Capacitance, Diode Test, Frequency, and Temperature.

Key Features

True 6 1/2 digit resolution
True-RMS AC Voltage & Current measurements
Real time measurement trending or histograms from the front panel
Built-in comprehensive configurations for a variety of temperature sensors
GPIB, USB, RS-232, and LXI-C (Ethernet) Connectivity


Power Quality Analyzer

Product Code:11005

Handheld Power quality analyzer with excellent features

Key Features

Safety: CAT III 1000V / CAT IV 600V
Standards: IEC61000-4-30 (2008) S class, EN50160 (2007)
Easy operation to capture the power quality problem
Display: Run Chart, Bar Chart, Vector Graphic, Waveform,Event List, Readings
Support USB & LAN Interface


Handheld Oscilloscope-cum-multimeter-cum-recorder

Product Code:11006

Combines the functions of oscilloscope, multimeter and recorder in one. It adopts many dedicated chips which allow it to be highly integrated, have low power consumption and with a very small footprint, etc.

Key Features

Completely isolated oscilloscope channels, isolated between oscilloscope and multimeter channels
60MHz/100MHz bandwidth, 2 input channels, 2Mpts memory depth
1GSa/s real time sampling rate, 50GSa/s equivalent sampling rate
3 kinds of cursor mode, 32 kinds of automatic waveform measurements
5.7 inches color TFT-LCD


Spectrum Analyzer, SSA Series

Product Code:11007

Siglent´s SSA3000X family of spectrum analyzers offer a frequency range of 9 KHz to 2.1 GHz / 3.2 GHz. With their light weight, small size, and friendly user interface, the SSA3000s present a bright easy to read display, powerful and reliable automatic measurements, and plenty of impressive features. Applications are many, but include research and development, education, production, maintenance, and many more.

Key Features

All-Digital IF Technology
Frequency Range from 9 kHz up to 3.2 GHz
-161 dBm/Hz Displayed Average Noise Level (Typ.)
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
Total Amplitude Accuracy < 0.7 dB


HIGH PERFORMANCE READOUT UNIT-CUM-DATA LOGGER

Product Code:11008

The unit is a low-cost, high-performance sensor readout unit with integrated datalogger. It Can be used with sensors having low voltage output, e.g., strain gages, accelerometers, heat flux sensors, etc The sensor sensitivity can be programmed into the unit such that the readout will show calibrated engineering units, rather than millivolts or microvolts.

Key Features

16-bit ADC
Resolution of as low as 1 microvolt
4-digit LCD display
Works on AA alkaline cells



StrikeAlert HD Personal Lightning Detector

Product Code:11014

This the first personal lightning detector with a graphical display that shows you the lightning strike distance (from 0 - 40 miles away) as well as a 1-hour storm trend and intensity.

Key Features

Intuitive Graphical Display
360 deg Lightning Detection
Audible/Vibrate Warnings
LED Indicators
Low Power Consumption


Kestrel 1000 Wind Meter

Product Code:11015

The Kestrel 1000 Wind Meter is the base model of Kestrel pocket weather meters. Simple and compact,extremely durable and totally waterproof, allowing you to measure wind speeds in even the harshest weather conditions

Key Features

Fits right into the palm of your hand
Weighs a mere 65 grams
Measures Current/Avg Wind Speed
Large easy-to-read display



Rigol's 2 Channel Digital Storage Oscilloscope

Product Code:11020

Rigol DS1102E Model is an economical digital oscilloscope with high-performance, which is designed with dual channels and 1 external trigger channel

Key Features

TFT/LCD, 5.7" Display
Sampling Rate: 1 GS/sec
Provides 20 types of wave parameters
Ultrascope application software
Pass/Fail detection function for testing results


Wind Speed Sensor

Product Code:12051

The wind speed sensor adopts the traditional three wind cup structure. The wind cup is made of ABS material, and has high strength and small starting wind speed. Built-in signal processing unit can output the corresponding wind speed signal according to the user demand. It has variety of output method such as RS485/RS232, pulse, voltage and current, which can be widely used in advertising barrier, meteorology, ocean, environment, airports, ports, laboratories, Industry and agriculture and transportation and other fields.

Key Features

Measuring Range: 0~45m/s / 0~70m/s
Operating Voltage: DC5V / DC9-30V
Output: Pulse/Current 4~20mA/Voltage 0~5V/ RS232/RS485
Ingress Protection: IP64



Wind Direction Sensor

Product Code:12002

The wind direction sensor uses a precision angle sensor and selects the low inertia wind vane to respond to the wind direction with good dynamic characteristics.The product has advantages of good linearity, high precision, no dead spots, strong anti-lightning ability, convenient observation,stable and reliable. It can be widely used in the fields of weather, ocean, environment, airports, ports, laboratories, agriculture, industry and transportation

Key Features

Measuring Range: 0~359 deg
Operating Voltage: DC5V / DC9-30V
Output: Current 4~20mA/Voltage 0~5V/ RS232/RS485
Ingress Protection: IP64



gSKIN Heat Flux Kit

Product Code:12003

gSKIN Heat Flux kit is quickest and easiest solution to monitor and analyze heat flux and temperature difference

Key Features

Calibrated Plug-and-Play solution
Ready-to-use heat flux data with a resolution of < 0.41 W/sqm
Stores up to 2 million data points
Battery lifetime >1 month
Logger and live read-out

Integrated Temperature, Humidity & Pressure Sensor

Product Code:12052

Atmospheric Temperature, Humidity & Pressure Sensor is a professional measurement of air temperature, relative humidity & barometric pressure. Sensors are built-in the water-proof and anti-UV shelter. It is widely used in agriculture,forestry, meteorology as well as a climate chamber,greenhouse, warehouse and other places. This model is equipped with 11 plates radiation shield to protect the sensors from solar radiation and rain

Key Features

Radiation Shields: 11 plates
Pressure Range: 300-1100 hPa
Temperature Range: -40 to 100 deg C
Humidity Range: 0-100 %
Output: RS232/ RS485


gSKIN Heat Flux Sensor - XP

Product Code:12006

Heat Flux Sensor Size: 10mm x 10mm Resolves 0.09 W/m2 - 9 microW - 30 microK

Key Features

Ultra-high resolution of thermal energies and temperature differences
Low invasiveness and thickness
Models with connector compatible with all gSKIN® DLOG Data Loggers
All sensors with conductive heat flux calibration cohering to ISO 8301
Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal propert

gSKIN Heat Flux Sensor - XI

Product Code:12007

Heat Flux Sensor Size: 18mm x 18mm Resolves 0.03 W/m2 - 9 microW - 10 microK

Key Features

Ultra-high resolution of thermal energies and temperature differences
Low invasiveness and thickness
Models with connector compatible with all gSKIN® DLOG Data Loggers
All sensors with conductive heat flux calibration cohering to ISO 8301
Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal propert

THIN FILM HEAT FLUX SENSOR W/O ENCAPSULATION - SMALL

Product Code:12008

Economically priced, yet highly reliable heat flux sensors. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc

Key Features

Available in various other dimensions
Very economical compared to other sensors in world market
Excellent Sensitivity
Compatible data loggers also available



THIN FILM HEAT FLUX SENSOR WITH ENCAPSULATION - SMALL

Product Code:12011

Economically priced, yet highly reliable heat flux sensors. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc

Key Features

Available in various other dimensions
Very economical compared to other sensors in world market
Excellent Sensitivity
Compatible data loggers also available
Sensing Area:1" X 1"


Liquid(Oils/Combustibles) Level Sensor, Horizontal

Product Code:12012

The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end

Key Features

Measurement Level: Horizontal
Liquids:Heavy Oils and Combustibles
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC

16-segment LiDAR sensor module

Product Code:12033

The Leddar M16 sensor modules are advanced, solid-state LiDAR solutions that combine wide-beam flash illumination with 16 independent detection segments to simultaneously deliver rapid, continuous and precise detection and ranging for multiple objects along with excellent lateral discrimination

Key Features

Can detecting targets up to 146 m
Various beam options for optimized field of view
Rapid data acquisition rate of up to 100 Hz
Proven reliability both indoors and outdoors
Outstanding robustness, with no moving parts


Humidity Sensor

Product Code:12023

The humidity sensor is an analog sensor which outputs voltage proportional to the relative humidity in the atmosphere

Key Features

Measurement range: 0 ~ 100%RH
Output signal: 0.8 ~ 3.9V (25ºC)
Accuracy: <±4%RH (a 25ºC, range 30 ~ 80%), <±6%RH (range 0 ~ 100)
Operation temperature: -40 ~ +85ºC
Response time: <15 seconds

Solar Radiation Sensor

Product Code:12056

Solar radiation sensor is used to measure the short-wave radiation(in the wavelength range of 400-1100nm) of the sun.It uses a silicon photodetector to generate a voltage output signal proportional to the incident light.In order to reduce the cosine error, a cosine corrector is installed in the instrument.

Key Features

Compliance with WMO World Meteorological Organization specifications
Spectral range?0-2000W/m2
Wavelength range?400-1100nm
Output: Analog Voltage/ RS485

Temperature+Humidity Sensor

Product Code:12025

This sensor incorporates a capacitive sensor for environmental relative humidity and a band gap sensor for environmental temperature in the same package that permit to measure accurately both parameters.

Key Features

Communication: Digital (two wire interface)
Temp Measurement range: -40ºC ~ +123.8ºC
Humidity Measurement range: 0 ~ 100%RH
Temp Accuracy: ±0.4ºC (range 0ºC ~ +70ºC), ±4ºC (range -40 ~ +125ºC)
Humidity Accuracy: ±1.8%RH

LiDAR Traffic Sensor with IP67 Enclosure

Product Code:12035

Packaged in a weatherproof housing, the powerful Leddar T16 Traffic Sensor is specifically designed for traffic management systems from city to highway applications. It offers cost-efficient and highly accurate vehicle detection for various Intelligent Transportation System (ITS) applications, such as free-flow electronic tolling, traffic monitoring and traffic law enforcement.

Key Features

Robust solid-state flash LiDAR design
Measurement rate of 200Hz for high-speed vehicle detection
Fully IP addressable; Single Cat 5e Ethernet cable
IP67 weatherproof enclosure
Detection range up to 75 m (246 ft.)


Pressure-sensitive force Sensor

Product Code:12027

The sensor is a pressure-sensitive resistive sensor. Resistance between the two ends of the terminals varies depending on the force exerted on the circular end of the sensor

Key Features

Measurement range: 0 ~ 25lb (11.34kg)
Resistance range: 5000 ~ 20kΩ
Length: 203mm Width: 14mm
Operating temperature: -9ºC ~ 60ºC
Response time: < 5 microseconds

Bend Sensor

Product Code:12028

This is a resistive sensor whose conductivity increases when folded. Its initial resistance is 200kΩ and can be reduced to about 50kΩ depending on the angle and degree of fold, allowing it to be used in applications such as movement detection relating to pieces or impact

Key Features

Resistance range: 50 ~ 200kΩ
Length: 11.43cm
Width: 0.95cm
Thickness: 0.096cm

Vibration Sensor

Product Code:12029

These are piezoelectric laminates which generate voltage at its output when subjected to a distortion. This therefore makes it useful as a system to measure vibrations caused by acceleration, knocks or contact, being especially useful in low consumption applications as they do not need power voltage for their operation

Key Features

Length: 2.41cm
Width: 1.30cm
Operating temperature: -15ºC ~ +60ºC
Storage temperature: -40ºC ~ +60ºC
Sensitivity: 10mV/microstrain

Current Sensor, 5A

Product Code:12031

Based on ACS721 current module, it can measure AC/DC current up to 5A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. Outputs is analog voltage which can be read using simple microcontroller ADC

Key Features

Measure Current Upto 5A
Supply Voltage: 4.5V~5.5V
Analog Output, proportional to AC or DC currents
Nearly zero magnetic hysteresis

Solar UV Sensor

Product Code:12055

The Solar UV Sensor adopts the photoelectric detector to receive the ultraviolet wave electrical signal. This product is one kind of precision instruments which is used to measure the solar ultraviolet radiation from the atmosphere . It can provide information on the public concern: the UV index, UV erythema measuring, the effects of the UV on person health and UV special biology and chemistry.

Key Features

Spectral Range: 280-400 nm
Measuring Range: 0-400 mW/m2
Operating Voltage: DC-5V/12V/24V
Output: 4-20 mA/ Voltage: 0-5V/RS485

Single Segment LiDAR Module - LeddarONE

Product Code:12034

The LeddarOne sensor module is dedicated to single-point detection and precise distance measurements. This low-cost module integrates patented Leddar digital signal processing technology for reliable performance at distance ranges up to 40 m.

Key Features

Detection range 0 to 40 meters (130 ft)
Accuracy 5 cm
Operating temperature range -40 degC to +85 degC
Distance precision 5 mm
Distance resolution 3 mm


Industrial grade 16-segment LiDAR module

Product Code:12036

Specifically designed for the industrial market, the Leddar IS16 is a robust, multi-segment flash LiDAR sensor that delivers consistent performance and reliability in the harshest conditions. With its weather-resistant enclosure, this solid-state LiDAR is perfectly suited to both outdoor and indoor applications.

Key Features

IP67 water-resistant enclosure
LCD and binary output configurations available
Detection range of up to 50 m
45 deg horizontal field of view
Proven reliability in harsh conditions


LiDAR based Stop-bar Detection System

Product Code:12037

The Leddar d-tec is a LiDAR-based stop-bar detection system offering advanced sensing capabilities for traffic light management. Compiling data at a rate of thousands of times per second, the Leddar d-tec provides accurate and reliable detection of all types of traffic (vehicles, bicycles, motorcycles, pedestrians) in all weather and lighting conditions. This above-ground traffic detection solution, which includes sensor units and controller cards that communicate directly with the light control unit, is the perfect alternative to legacy induction loop detectors

Key Features

Multilane stop bar detection with 16 segments per d-tec
Detection range of up to 75 m
Reliable detection in all weather and lighting conditions
Integrated video sensor with Pan and Tilt actuator
Remote access configuration and monitoring


9-axis Sensor with Barometer

Product Code:12039

A very useful module comprising of Triple Axis gyroscope - L3G4200D Triple Axis Accelerometer – ADXL 345, Triple Axis Magnetometer - HMC5883L Pressure Barometer Sensor – BMP08

Key Features

Dimensions: 1.02 in x 0.67 in x 0.04 in (2.6 cm x 1.7 cm x 0.1 cm)
Weight: 1.06 oz (30 g)
Supply power: 3~5V
I2C communication protocol
Modules include 1 x Sensor module, 2 x Pin headers

ADXL335

Product Code:12040

Triaxial accelerometer with analog output

Key Features

Supply 3-5V
Axis: X,Y,Z
Dimensions: 0.83 in x 0.63 in x 0.43 in (2.1 cm x 1.6 cm x 1.1 cm)
Weight: 0.11 oz (3 g)
Includes 1 x ADXL335 module

Waterproof Temperature Sensing Probe

Product Code:12041

Waterproof DS18B20 Waterproof stainless steel encapsulated temperature sensor(DS18B20)

Key Features

Supply 3-5V
High-quality stainless steel anti-rust waterproof package
Stainless steel housing (6 * 30mm), overall length to end of wire 100cm
Wide temperature range -55 ~ +125 deg C
No external components, unique "1-wire" interface

Sharp's GP2Y0A41SK0F Infrared Proximity Sensor

Product Code:12042



Key Features








gSKIN Heat Flux Sensor - XO

Product Code:12043

Robust Silicone Heat Flux Sensor Size: 30 mm x 30 mm Resolves 0.1 W/m2 - 81 microW - 230 microK

Key Features

Ultra-high resolution of thermal energies and temperature differences
Robust Sensor
Models with connector compatible with all gSKIN® DLOG Data Loggers
All sensors with conductive heat flux calibration cohering to ISO 8301
Applications: In-situ Building monitoring, U-Value determination, environmental monitoring e.g. soil

Water Level Sensor, Horizontal,

Product Code:12044

The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end

Key Features

Measurement Level: Horizontal
Liquids: Water
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC

gSKIN U-Value Kit

Product Code:12045

gSKIN U-value kit is extremely useful for Measurement of U-value (W/(sqm K)), heat flux (W/sqm), and 2 temperatures (deg C)

Key Features

Calibrated Plug-and-Play solution
Compatible with standards ISO 9869 and ASTM C1046 /ASTM C1155
Stores up to 2 million data points
Battery lifetime >1 month
Read-out software included

gSKIN Heat Flux Sensor - XM

Product Code:12005

Heat Flux Sensor Size: 4.4mm x 4.4mm Resolves 0.4 W/m2 - 9 microW - 140 microK

Key Features

Ultra-high resolution of thermal energies and temperature differences
Low invasiveness and thickness
Models with connector compatible with all gSKIN® DLOG Data Loggers
All sensors with conductive heat flux calibration cohering to ISO 8301
Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal propert

gSKIN Heat Flux Starter Kit

Product Code:12004

Heat Flux Sensor Starter Kit is ideal for thermal characterization of batteries) Size: 4.4mm x 4.4mm and 10.0mm x 10.0mm Resolves 0.4 W/m2 - 9 microW - 140 microK

Key Features

Ultra-high resolution of thermal energies and temperature differences
Low invasiveness and thickness
For space resolved measurements, SOC control, life-time observation and BMS
All sensors with conductive heat flux calibration cohering to ISO 8301
Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal propert

Tipping Bucket Rain Guage

Product Code:12054

Tipping bucket rain gauge provides a reliable low-cost rain measurement sensor. It has an inner funnel to even the flow of the railfall into the gauge, providing better accuracy at higher rainfall rates. Its simplicity of design assures trouble-free opertaion , yet provide accurate rainfall measurement.

Key Features

Measuring Range: 0~4 mm/min
Resolution: 0.2 mm/ 0.5 mm
Inner Dia: 200 mm
Output: Reed Switch

e-Health Sensor Platform Kit

Product Code:12059

e-Health Sensor Platform Complete Kit allows to get a complete First Aid Kit for Makers. It allows users to perform biometric and medical applications where body monitoring is needed by using 9 different sensors

Key Features

e-Health Sensor Shield for Arduino and Raspberry Pi
Pulse and oxygen in blood sensor, Air Flow(Breathing Sensor
ECG, EMG & Glucometer Sensor
GSR - sweating sensor, Blood pressure sensor
Body temperature & position sensor


Pre-wired Strain gages

Product Code:12060

Prewired Linear,Foil strain gage for easier installations for embedded measuring grid

Key Features

No Soldering at the Measuring Point
Rugged Polyimide Carrier
Fully Encapsulated Gages for Protection from the Environment
? 120 or 350
0.3 mm grid, 2-leads, 1 m long

Pre-wired Strain gages

Product Code:12061

Prewired Linear,Foil strain gage for easier installations for embedded measuring grid

Key Features

No Soldering at the Measuring Point
Rugged Polyimide Carrier
Fully Encapsulated Gages for Protection from the Environment
? 120
0.6 mm grid, 2-leads, 1 m long

High Precision Inclinometer

Product Code:12062

It is an exciting instrument for indoor and outdoor work requiring precision and rugged durability. It is excellent for continuous monitoring of structural behavior, or short-term testing of machine and structural performance.

Key Features

Angular Range: +/- 3 degees to +/-50 degrees
Resolution of 0.0001 deg
Digital Output
DC Powered
Wide operating temperature range


Water Level Sensor, Vertical

Product Code:12013

The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end

Key Features

Measurement Level: Vertical
Liquids: Water
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC

Presence Sensor(PIR)

Product Code:12014

The PIR sensor (Passive Infra-Red) is a pyroelectric sensor mainly consisting of an infrared receiver and a focusing lens that bases its operation on the monitoring of the variations in the levels of reception of detected infra-reds, reflecting this movement by setting its output signal high

Key Features

Height: 25.4mm Width: 24.3mm Length: 28.0mm
Consumption: 100μA
Range of detection: 6 ~ 7m
Spectral range: ~ 10μm

Hall Effect Sensor

Product Code:12015

This is a magnetic sensor based on the Hall effect. The sensor’s switch remains closed in the presence of a magnetic field, opening up in its absence. Together with its complementary magnet (P6250000) it can be used in applications of monitoring proximity or opening mechanisms

Key Features

Length: 32mm Width: 15mm Thickness: 7mm
Maximum contact resistance (closed): 150mΩ
Minimum contact resistance (open): 100GΩ


Water Leakage/Liquid detection Sensor(Point)

Product Code:12016

This sensor bases its operation on the variation in resistance between its two contacts in the presence of liquid to commute a switch reed from open to closed, commuting to open again when the liquid disappears (take care when it is used to detect liquids of high viscosity which may remain between the terminals blocking its drainage and preventing it from re-opening)..

Key Features

Maximum Switching Voltage: 100V
Operating temperature: +5ºC ~ +80ºC
Detectable liquids: Water


Liquid Flow Sensor

Product Code:12017

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 0.15 ~ 2.5L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 3900 pulses/liter
Inlet pipe size: 2mm Outlet pipe size: 4mm

Liquid Flow Sensor,0.5 ~ 25L/Min

Product Code:12018

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 0.5 ~ 25L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 450 pulses/liter
Pipe connection: ½’’

Liquid Flow Sensor, 1 ~ 60L/Min

Product Code:12019

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 1 ~ 60L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 390 pulses/liter
Pipe connection: 1’’

Atmospheric Pressure Sensor

Product Code:12020

The sensor is an analog sensor which outputs voltage proportional to the atmospheric pressure.

Key Features

Measurement range: 15 ~ 115kPa
Output signal: 0.2 ~ 4.8V (0 ~ 85ºC)
Sensitivity: 46mV/kPa
Accuracy: <±1.5%V (0 ~ 85ºC)
Response time: 20ms

Water Leakage/Liquid detection Sensor(Line)

Product Code:12021



Key Features

Length: 5 meters sensor + 2 meters jumper wire
Material: PE & alloy lend
Pull force limit: 60kg
Core resistance: 3ohm/100meters
Detectable liquids: Water

Stretch Sensor

Product Code:12022

This is a resistive sensor whose conductivity drops when it is stretched lengthwise, regaining its original resistance once returned to rest, so it is useful in applications such as monitoring of force or variations of distances

Key Features

Resistance of the sensor at rest: 1kΩ per inch
Length: 4 inches (10.16cm)
Resistance of the sensor in tension (50% stretch):Approximately 2kΩ per inch


Temperature Sensor

Product Code:12024

The temperature sensor is an analog sensor which outputs voltage proportional to the relative humidity in the atmosphere

Key Features

Measurement range: -40ºC ~ +125ºC
Output voltage (0ºC): 500mV
Sensitivity: 10mV/ºC
Accuracy: ±2ºC (range 0ºC ~ +70ºC), ±4ºC (range -40 ~ +125ºC)
Response time: 1.65 seconds

Draw Wire Sensor

Product Code:12026

Linear Displacement Transducer wfor measuring large displacements

Key Features

Output: Potentiometric/Voltage/Current
Measuring Range: 3000 to 7500 mm
Linearity: 4.5 mm to 11 .25 mm
Protection Class: IP65
Plastic Housing, 0.45 mm coated draw Wire

Arduino Leonardo

Product Code:14021



Key Features

Based on the ATmega32u4
20 digital input/output pins
16 MHz crystal oscillator
Built-in USB communication

Arduino NANO

Product Code:14022



Key Features






Arduino MEGA 2560

Product Code:14025



Key Features






Arduino Micro

Product Code:14026



Key Features

Microcontroller board based on the ATmega32u4
20 digital input/output pins
Built-in USB communication
Clock Speed:16 MHz

Intel GALILEO BOARD

Product Code:14029

The Intel® Galileo board is based on the Intel® Quark SoC X1000, a 32-bit Intel Pentium®-class system on a chip (SoC). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with shields designed for the Arduino Uno R3

Key Features

Software-compatible with the Arduino Software Development Environment
Several PC industry standard I/O ports and features
Full sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host p


Raspberry PI Model B

Product Code:14030

The Raspberry PI is a credit-card sized computer capable of doing many things that a desktop PC does like spreadsheets, word-processing and games It is a little PC that plugs into a TV and a keyboard. It also plays high-definition video. It can run several flavors of Linux.

Key Features

Designed around Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS
GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
two USB ports and a 10/100 Ethernet controller
Small and powerful

3G GPRS Shield for Arduino, Raspberry PI and Intel Galileo

Product Code:14031



Key Features

compatible with Arduino, Raspberry Pi and Intel Galileo boards
WCDMA and HSPA 3G networks compatibility
Internal GPS for Assisted A-GPS and Supported S-GPS modes
Video Camera (640x480) for video and photo recordings available
Video Camera (640x480) for video and photo recordings available

Bluetooth to Serial Module

Product Code:14032

A bluetooth module tor interfacing to any microcontroller. . It can also connect to your smartphone or a laptop (master devices).

Key Features

Slave ONLY Device
4-pin Device
Built in Antenna
Baud Rate Support Upto 1382400
Bluetooth Specn v2.0

18V 5W Foldable Solar panel

Product Code:15026

Charge your mobile on the move

Key Features

Power max: 5W
Vmp: 18V, Voc: 21.6V
Imp:0.278 A, Isc: 0.3A
Weight: 1 kg

Rollable CIGS Solar Mobile Phone Charger-cum-Power Bank

Product Code:15025

Most popular solar charger, flexibly retractable and multi functional. It uses high performance lithium batteries as power storage and the battery is able to charge the phone as well as power the flashlight when it is charged by the solar panel.

Key Features

18650 Li ion battery 2500mAh capacity*2PCS,5000mah
Output Voltage/Current: 5V/1A
Charging Time: 5-6 hours
Product shrink size: 180*55*50mm
Product extend size: 180*125*560mm

Foldable Solar Charger

Product Code:15024

Charge your mobile on the move

Key Features

Solar panel: 13W
Ideal for smartphone
Charge mobile phones , even in cloudy day.
Battery: 5000 mAh



DC-18 GHz FLEXIBLE RFCABLE ASSEMBLY, Model: C02

Product Code:17001

Cost effective solutions for RF/Microwave/Millimeter Wave Coaxial cable Assemblies; suitable for both military & commercial applications

Key Features

Excellent & consistent mechanical & electrical performance
Loss loss, Low VSWR and high power handling
High shielding effectiveness
Phase stable over flexure
Good phase tracking performance


DC-18 GHz SEMIRIGID RFCABLE ASSEMBLY, Model: E05

Product Code:17002

Cost effective solutions for RF/Microwave/Millimeter Wave Coaxial cable Assemblies; suitable for both military & commercial applications

Key Features

Compliant with MIL-C-17 spec
Loss loss, Low VSWR
Good shielding effectiveness
Wide Frequency Coverage, upto 40 GHz
Good phase matching


DC-18 GHz HANDFORMABLE RFCABLE ASSEMBLY, Model: F04

Product Code:17003

Cost effective solutions for RF/Microwave/Millimeter Wave Coaxial cable Assemblies; suitable for both military & commercial applications

Key Features

Hand formable to any custom shape
Loss loss, Low VSWR
Good flexibility
Support upto 26.5 GHz
Ideal for integrating components and sub-assemblies


Audio/Video, RF & Microwave Adapters

Product Code:17010

All types of Audio, Video, RF and microwave adapters available as per customers' requirements

Key Features

All types of end terminations available
Impedance: 50 ohm/ 75 ohm
Plug/Receptacle options
Straight/Angled options
Nickel/Gold Plating


XBee PRO 802.15.4 SMA RF Modules

Product Code:17011

The XBee and XBee-PRO RF Modules were engineered to

Key Features

RF Data Rate: 250,000 bps
Range(Indoors): Upto 90 m
Range(Outdoors): Upto 1.6Km(RF LOS)
Advanced Networking & Security features
Easy to Use


BreadBoard

Product Code:18021

This breadboard has 2 power buses on either side for carrying power lines. The connection between the power line is broken in the middle, like most beradboards. The gap between the rows enables even ICs to be plugged in.

Key Features

Total of 64 columns and 8 rows of holes
The board accepts wire sizes in the range of 29-20AWG.



Components for Wall avoiding Robots

Product Code:18022

ssembling the components wyou

Key Features

Include Arduino Board, Battery, Wheels and Motors
Assembling Instructions
Accessories like Battery Clips, Screws, etc.


Digital Temperature Meter using LM35

Product Code:20201

Simple Digital temperature meter for displaying temperature on a LCD

Key Features

Uses LM35 for precision temperature measurement
DIY Kit includes all components, Wires, connectors
Includes Source Code for Microcontroller
Includes Writeup, Circuit Diagram and necessary details
Also available in integrated form

Digital Multi-Temperature Meter using I2C Protocol

Product Code:20202

Simple Digital temperature meter for displaying temperature on a LCD

Key Features

Uses two TC74(or more) for multi temperature measurement
DIY Kit includes all components, Wires, connectors
Includes Source Code for Microcontroller
Includes Writeup, Circuit Diagram and necessary details
Also available in integrated form

Digital Altimeter

Product Code:20203

Simple Digital Altimeter for displaying Altitude on a LCD

Key Features

Uses MPL3115A2
DIY Kit includes all components, Wires, connectors
Includes Source Code for Microcontroller
Includes Writeup, Circuit Diagram and necessary details
Also available in integrated form

High Resolution Data Logger for Strain Gage

Product Code:20204

High Resolution Datalogger can measure as low as 1 microvolt, thereby facilitating direct measurement of low level signals without the use of signal amplifiers High Resolution Dataloggers are available for Differential/Single ended measurements. No of channels can be configured from 16/32/48 SE or 8/16/24 DI channels. Provision has been made to log the timestamped data in the SD Card. The data is logged in .CSV Format, which can be easily analyzed using MS Excel. Optional, software for data analysis & report generation can be offered.

Key Features

16/32/48 SE or 8/16/24 DI channels
2.8 inch TouchScreen TFT Display
SD Card Storage
Resolution of 1 microvolt
Optional Wireless transmission


Control DC Motors using Smartphone

Product Code:20205

A very interesting project to control DC motor through Bluetooth, with the help of your Smartphone

Key Features

Uses Bluetooth Module
DIY Kit includes all components, Wires, connectors
Includes Source Code for Microcontroller
Includes Writeup, Circuit Diagram and necessary details
Also available in integrated form

Wifi Enabled Waterproof Action/Sports Camera

Product Code:21001

An excellent camera for adventure freaks; can be used underwater and tough conditions. It can be operated remotely. The pictures & videos can also be received through Wifi.

Key Features

Very Wide Field of View: 170 deg
Waterproof: Usable in underwater applications
Remote operation & Wifi enabled
Suitable for helmet mounting and various other configurations



Raspberry Pi 4 Model B

Product Code:14050

Raspberry Pi 4 Model B is faster and more powerful than its predecessors.

Key Features

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
2 USB 3.0 ports; 2 USB 2.0 ports.
2 × micro-HDMI ports

WebCam-Logitech C170

Product Code:13011

Logitech C170 Webcam uses a fluid crystal technology, which gives you a smooth, sharp, clear and rich visual experience.

Key Features

Video Resolution: 1024 x 768 pixels
Pan, tilt, and zoom controls. Video and photo capture. Face tracking. Motion detection.
USB Cable included


HD Webcam Logitech C310

Product Code:13017

HD Webcam from Logitech gives you excellent clarity without annoying background noise.

Key Features

Video Resolution:1280 X 720 pixels
Included software for Pan, tilt, and zoom controls. Video and photo capture. Face tracking. Motion d
Windows 7/8


External Hard Drive, 1TB

Product Code:13018

Small passport size external hard-drive features USB 3.0 offers amazingly fast transfer speed.

Key Features

Sleek and sturdy design
Capacity: 1 TB
Color: Black
Connectivity: USB 3.0

WiFi USB Dongle

Product Code:13019

It supports 802.11b/g/n and is based on single chip Ralink RT5370. It delivers reliable throughput from extended distance.

Key Features

1T1R 2.4 GHz with 150 Mbps PHY data rate
CMOS single chip with RF
QoS: WMM & WMM-PS support
Low Power usage
Security: WEP

WiFi USB Dongle-Integrated Antenna

Product Code:13020

Use the dongle for interrupt-free , reliable throughput

Key Features

Supports 802.11 b/g/n
Speed upto 150 Mbps Speed
Based on RALINK 8188 Chipset
Compatible with almost all OS

TPLINK Wireless N Router

Product Code:13022

TL-WR841N Wireless N Router with Speed 300 Mbps

Key Features

300Mbps wireless speed
Dual Antenna
Wireless security encryption
IP based bandwidth control
Compatible with IPv6

8-Channel DAQ for Heat Flux Sensor & Thermocouple

Product Code:11010

DAQ system can be used for accurately measuring and recording outputs of heat flux/thermocouple sensors. It is not only an inexpensive data acquisition system but also one of a few systems that can accurately &precisely resolve heat flux sensor and thermocouple output signals

Key Features

8 Differential Channels; 4 for Heat Flux & 4 for Thermocouple
24-bit Delta Sigma ADC
Resolution better than 1 microvolt
Max Sampling Rate of 2.5 Hz
Integrated CJC Compensation

Electricity Generation from Speed Breaker

Product Code:22011



Key Features






Wind mill power generation model

Product Code:22012

Model depicts a wind turbine that extracts of energy from wind.

Key Features






Burglar Alarm

Product Code:22013



Key Features






DIY Film Projector

Product Code:22014



Key Features






Stethoscope

Product Code:22015



Key Features






Centrifuge Model

Product Code:22016



Key Features






Narrow Linewidth & Low Noise DPSS Lasers

Product Code:23011

These ultra compact laser offer narrow spectrum linewidth<0.003 nm and low noise and are ideal for use in DNA sequencing, flow cytometry, digital imaging, analytical chemistry, particle measurements, confocal microscopy, Raman Spectroscopy and many other applications.

Key Features

Available in various wavelengths
Available with output power upto 1500 mW
Transverse mode: TEM00
Spectrum linewidth (nm): <0.003
Beam quality: M2<1.2

Single Mode Laser Diode

Product Code:23012

These offer small emitting aperture and low beam divergence.

Key Features

Fabry Perot laser cavity
Available in wavelength range 405-1550nm
Avaialble in optical output power of 5-300mW
InGaAs, AlGaAs or InGaAsP MQW
TO-CAN package

Pulsed Diode Laser

Product Code:23013

Infrared diode laser at 905nm features pulsed operation, high peak power, long lifetime, low cost and easy of operation. These are widely used in laser distance measurement, etc

Key Features

Wavelength (nm): 905 /1550
Rep. rate (Hz):1~20k
Single pulse energy (uJ): 7 (@10KHz) (for 905 nm)


High Stability DPSS Lasers

Product Code:23014

These ultra compact laser offer good sealing, high output power stability, good beam profile, ultra compact, wide operating temperature, long lifetime, easy of operation and works under the pressure of 0.02 kPa. They are widely used in DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, collimation, laser medical treatment, scientific experiment and other applications.

Key Features

Available in various wavelengths
Available with output power upto 1500 mW
Transverse mode: TEM00
Beam quality: M2<1.2
Compatible Power Supplies & accessories available

Fiber Coupled Laser Diodes Module

Product Code:23015

These Coaxial Package Diode Laser are available with SM/PM Fiber and can be customized as per customer requirements

Key Features

Fabry Perot/ DFB laser
Available in wavelength range 405-1550nm
Avaialble in optical output power of 1-100mW
Package: Coaxial
Various Fiber types & Connector options

Laser Line Generator

Product Code:23016

Line generator can be used to display a uniform straight reference line for use in alignment, machine vision systems, construction and process control. In addition, the lenses may also be used on lower power lasers, lenses are available in fan angles of 5°, 7°, 10°, 30°, 45°, 60°, 75°, 90° and 100° for custom applications.

Key Features

Available for all wavelengths
Available for all optical powers
Gan angles of 5° to 100°


Beam Combiner/ Splitter

Product Code:23017

RGB beam combiners enable any two or three primary colours in the visible wavelength region to be combined.

Key Features

Available for either 2 or 3 wavelengths
3 wavelength combiners provide full RGB operation
2 wavelength combiners combine red/green, green/blue or red/blue.
Output power up to 30 Watts

Optical Fiber Adapters/ Couplers

Product Code:23018

Applications include Optical communication systems, LAN, CATV FTTH/PON, etc.

Key Features

Low Insertion Loss
Various end terminations
High Durability




Diode Laser - XS Series

Product Code:23021

These laser modules feature integrated and miniaturized electronics. They offer ideal solutions for wide range of applications including life sciences, environmental monitoring, inspection and machine vision

Key Features

Available in various wavelengths
Available with output power upto 200 mW
Require proper heat sink
Compatible Power supply available

TEM Mode Diode Laser

Product Code:23022

TEM00 mode diode laser offer high performance, long lifetime and ease of operation. It is widely used in measurement, communication, scientific experiment, spectrum analysis, optical instrument and so on. These are the perfect choice for design in and integration into OEM instrumentation and systems and also for end user applications in research and development.

Key Features

Available in different wavelengths
Available in different optical output power configurations
CW operating Mode
M2 factor : < 1.1

Orange Pi PC

Product Code:14016

t’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the banana pi Image. It uses the AllWinner H3 SoC, and has 1GB DDR3 SDRAM

Key Features

H3 Quad-core Cortex-A7 H.265/HEVC 4K
Mali400MP2 GPU @600MHz
1GB DDR3 (shared with GPU), MMC Slot
Interfaces: Ethernet, Video In/out, Audio In/Out,
Applications: Server, Games, Sounds, Video, Android, etc

ODROID-C1+

Product Code:14013

The ODROID-C1+ is an ARM device.Featuring a quad-core processor, it can function as a home theater set-top box, a general purpose computer, gaming and socializing, a prototyping device , a controller, etc.

Key Features

Runs Ubuntu, Android, Fedora, ARCHLinux, Debian, and OpenELEC,
Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs
1Gbyte DDR3 SDRAM
Infrared(IR) Receiver
Gigabit Etherne

Cubieboard4 High-performance Mini PC Development Board

Product Code:14014



Key Features

CPU Octa-core big.LITTLE Cortex-A15/7
GPU 64-core IMG PowerVR G6230
Supports Video
Supports 5M/8M/12M/16M CMOS sensor
USB, Ethernet, UART

Compact Three Phase AC Voltage Logger

Product Code:14081

Three Phase AC Voltage Logger is useful for monitoring voltage variations on site and helping the engineers to diagnose any voltage related issues

Key Features

Small size 145x89x46mm
Ideal for industrial logging
Memory capacity of 32,000 values / channel , up to 300 days recording
Recording Period: 1 sec to 60 mins
Environmental Sealing: IP43 as standard

Web based Relay Control Boards

Product Code:21007

These boards allows you to control anything from anywhere with just the Internet and a Browser. Now, Control Web Relays from anywhere you can get an internet connection and on any device with a web browser. That means that your computer, PDA, cell phone, iPhone or Android becomes a remote control for this device!

Key Features

Upto 32 Nos of SPST Relays
Current Rating upto 30A
Ethernet/Wifi/bluetooth/serial as control options
Provision to monitor analog inputs



1.27mm Ejector Header,dip type

Product Code:14035



Key Features

Insulator Material: Polyester, Ul94v-0
Terminal Material: Copper Alloy
Finish: Gold Or Tin Plated
Current Rating: 1 Ampere
Dielectric Withstanding Voltage: 1000 V /1 Minute

2.00mm Pitch FD Connector,2pcs set

Product Code:14036



Key Features

Insulator Material: Polyester, Ul94v-0
Terminal Material: Copper Alloy
Finish: Gold Plated Over Nickel
Current Rating: 2 Ampere
Dielectric Withstanding Voltage: 500 V /1 Minute

Double layer 9 pin male D-sub connector

Product Code:14037



Key Features

Shell:Steel,Ni or Sn plated
Contact:Brass,selective gold plated
Rated current:1.0A
Rated Voltage:300V DC
Contact resistance:20m Ohms max

2*4 port right angle stacked RJ45 with led

Product Code:14038



Key Features

Shell:copper alloy
Contact:phosphor bronze,gold plated
Rated current:1.5A
Rated Voltage:125V DC
Durability:750 cycles

2.54mm pitch wire to wire connector

Product Code:14039



Key Features

Insulation material:PA66,UL94V-0
Terminal:brass
Plating:Tin plated over nickel
Current rating:3A
AWG:2 to 12

Fiber Optic Cable Assembly - Customized

Product Code:23023

Fiber Optic Cables we offer are RoHS compliant, and are guaranteed for high quality. The cables are comprehensively tested to make sure that the cables work securely and data transmission is reliable and stable in your network

Key Features

All type of connector options
Different types of Jacket options
Customized to Lengths as per requirements
Available in Simplex/Duplex Configurations



Fixed Fiber Optic Attenuators -Single

Product Code:23024

Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver.

Key Features

Available in various configurations
Precise & stable Attenuation values
Low PDL and insertion loss
Precisional reflection polishing



Variable Fiber optic Attenuators - Inline

Product Code:23025

Variable in-line optical attenuators comprises a dual fiber collimator and a reflection component separated by a linear moveable ND filter. They are used to permit dynamic control of optical power levels in a fiber and can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter.

Key Features

Wide attenuation range 0dB to 60dB
Low PDL and insertion loss
High stability & high reliability




Variable Rotary Attenuator, 0-11 dB

Product Code:17012

Variable Attenuator for use in-line in the test setup.

Key Features

DC-2.7 GHz, 2 or 5W option
Available step value:0dB, 1dB, 2dB, 3dB, 4dB, 5dB, 6dB, 7dB, 8dB, 9dB, 10dB, 11dB.
Impedance: 50 or 75 ohm
Operating up to 85 deg C
Ultra small size with innovative microstrip technology

Fixed & Attenuator, 30 dB

Product Code:17013

Fixed Attenuator for use in-line in the test setup.

Key Features

DC-3 GHz
25W Power handling capacity
Op. temp: -55 to +125 deg C
Impedance: 50 ohm
Small VSWR

Soil Moisture & Temperature Sensor

Product Code:12071

Soil sensors are widely used in agricultural greenhouses, flower cultivation, pasture grassland and other occassions. It is a high-precision and sensitive sensor for measurement of Soil Moisture and Temperature with high precision, fast response and stable output

Key Features

Range:H:0%-100% T: -40 to +80 deg C
Accuracy:H:+/-3%(5%~95%,25 degC ) T: +/-0.5(25 degC)
Output signal: Analog (4-20mA/0-5Vdc) /RS232 or RS485
Protection: IP68

Comb Soil Analyzer

Product Code:12072

Chlamydoscope is a sensor based on the principle of dielectric constant, which can monitor the soil temperature and humidity of different soil layers quickly, accurately and comprehensively.

Key Features

Monitoring of soil temperature and humidity(10 cm/20 cm interval, 3 or 5 levels)
Moisture Range: 0-100%
Moisture Accuracy:+/-3% between 0-53%;+/-5% between 53-100%
Temperature-Measurement Range: -30 degC ~80degC
Temperature Accuracy: +/-5%

Leaf Wetness Sensor

Product Code:12073



Key Features

Range: Wetness: 0-100%, Temperature: -40-+80 degC
Accuracy: Wetness: +/-3%(0-50%),+/-5%(>50%) Temperature: +/-0.5degC
Repeatability: <+/-3%FS
Temperature Drift: +/-0.2%FS/degC
IP Rating: IP65

Digital Temperature & Humidity Sensor

Product Code:12220

It is wall-mountable and is enclosed in a enclosure with IP65 protection

Key Features

Measuring range- Temp:-40~+120 degC
Measuring range- Humidity 0%RH-100%RH
Variety of Probe options
IP65 protection, excellent reliability and good precision



Air Quality Detection Sensor

Product Code:12224

This sensor adopts the principle of laser scattering measurement and sieves through unique data dual-frequency acquisition technology to obtain the number of particles of equivalent particle size per unit volume

Key Features

Measuring range:PM2.5:0~6000ug/m3, PM10:0~6000ug/m3
Response time:<90s
Signal output: RS485(Modbus-RTU protocol)
Resolution: 1ug/m3



Solar Radiation Sensor

Product Code:12228

It can be used to measure solar radiation with a spectral range of 0.3~3?m. The radiation sensor uses high-precision photosensitive elements, wide spectral absorption, high absorption in the whole spectrum, and good stability

Key Features

Body Material:Polycarbon/ Aluminium Shell
Measuring range:0~1800W/m2
Spectral range:0.3~3 micron
Resolution:1W/m2



Flyboys Reversible Kneeboard/ Thighpad

Product Code:22001

Reversible Kneeboard is designed specifically to accommodate ALL Pilots (right AND left handed). All pouches and pen pockets are removable and secured in place with hook and loop

Key Features

Clipboard with spring action securely holds checklists in place.
Detachable Eyelet Strip
All accessories detachable and reconfigurable
Elastic leg strap with adjustment
Standard "approach book" size clipboard area - 5" x 8"


Kestrel 3500 Pocket Weather Tracker

Product Code:11035

The Kestrel 3500 Weather Meter is designed as a full weather meter that has the ability to measure environmental variables such as temperature, wind speeds, barometric phenomena, pressure trends of up to 3 hours, and more. This rugged and affordable meter provides a complete range of reliable weather measurements.

Key Features

Measures Wind Speed, Gust, Temperature and many more
Large easy-to-read display with backlight
User-replaceable, impeller
Forecast weather with pressure trend indicator



3D Flash LiDAR, Leddar Pixell

Product Code:12038

Leddar Pixell, a 3D flash LiDAR with 180-degree field of view, is specifically designed for ADAS and autonomous driving applications. The Leddar Pixell provides highly reliable detection of pedestrians, cyclists, and other obstacles in the vehicle’s vicinity and is ideal for use in perception platforms that are meant to ensure the safety and protection of vulnerable road users

Key Features

Optimized for ADAS/AD detection cocoon
Detection range of up to 56 meters
180-degree proximity coverage
3D flash illumination providing 100% scene coverage
100% Solid-State, IP67 enclosure


Kestrel 5700 Elite Meter with Applied Ballistics with LiNK

Product Code:11101

The Kestrel 5700 Elite Weather Meter with Applied Ballistics is a comprehensive weather meter for measurement and logging of primary environmental conditions, including wind speed and direction, temperature, humidity, heat index, pressure, and altitude. It also contains a powerful ballistics calculator to help you hit your long-range shot on the first try. This meter employs the Applied Ballistics bullet library of custom drag models, an exact measurement of your bullet’s drag profile plus corrections for Aerodynamic Jump, Spin Drift, Coriolis, and Drop Scale Factoring to achieve accurate extended long-range shots

Key Features

All meters include both options of Red (NV - Night Vision) & White backlights
Bluetooth LINK to Smartphones / Mobiel / Android / IOS
Takes 1 AA battery
Scratch and breakage-resistant window

Kestrel 5700X Elite Weather Meter with Applied Ballistics

Product Code:11102

The Kestrel 5700X Elite Weather Meter with Applied Ballistics will help you hit targets faster and further than ever before. The 5700X offers the same accuracy and reliability as the industry gold standard 5700 Elite, yet packs more performance power to deliver faster firing solutions in the field for multiple extreme long-range targets. With an upgraded processor that is more powerful and faster than the 5700 Elite, the 5700X provides quicker targeting data for extreme long-range targets. For increased security, the adjustable Bluetooth® Low Energy signal can be dialed from full power to off position to minimize Bluetooth® range detectability.

Key Features

Employs the Applied Ballistics bullet library
Weather mode offers the full environmental measurements
Optional LiNK connectivity
Rugged & waterproof

Kestrel 5400 Heat Stress Tracker

Product Code:11103

he Kestrel 5400 is revolutionary in size, cost and capability for those in need of measuring Heat Stress. Available with or without LiNK (Bluetooth) and / or a compass. Along with having a Wet Bulb Global Temperature reading, the Kestrel 5400 displays thermal work limit (“TWL”), another recognized composite heat stress prediction tool. For both WBGT and TWL, the Kestrel 5400 provides on-screen alarms when conditions enter the caution and danger zones, providing clear and immediate guidance that heat illness prevention steps must be taken. Clothing levels can also be customized, making the Kestrel 5400 particularly useful in activities requiring heavy protective gear which worsens heat stress. The Kestrel 5400 also displays natural wet bulb temperature, and black globe temperature.

Key Features

Flag warnings via loud buzzer & LED beacon
Bluetooth LINK to Smartphones / Mobiel / Android / IOS
Scratch and breakage-resistant window
All meters include both options of Red (NV - Night Vision) & White backlights

Kestrel 3500 Weather Meter

Product Code:11104

The Kestrel 3500 Weather Meter is designed as a full weather meter that has the ability to measure environmental variables such as temperature, wind speeds, barometric phenomena, pressure trends of up to 3 hours, and more. This rugged and affordable meter provides a complete range of reliable weather measurements

Key Features

Large easy-to-read display with backlight
Forecast weather with pressure trend indicator
Protective cover with sure-grip overmolding
Patented user-replaceable impeller

Flyboys Classic Kneeboard/ Thighpad

Product Code:22002

The FlyBoys Classic Kneeboard has been the kneeboard of choice for military aviators for decades. It is extremely versatile and durable enough to offer years of use in the toughest environments

Key Features

Ultra-rugged D600 fabric ensures years of trouble-free use in the most demanding environments
Features seven eyelets for securing checklists, inflight guides, and more
Flexible plastic clipboard (FB1060) provides an excellent writing surface




Portable Single Gas Detector

Product Code:11200

Portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines, and keeps the workers safe, prevents the facilities from being destroyed

Key Features

Supports 30 different types of gases
Advanced MCU control with low power consumption
IP65 Rated
Advanced MCU control with low power consumption



Thermocouple Datalogger-cum-Real time Monitor

Product Code:11016

8-Channel Datalogging system wich support K/T/J/S type thermocouples

Key Features

Simultaneously measurement of 8 thermocouples
Touch Screen Display
Supports T/J/K/S/any type of thermocouple
Handheld

Your Shopping Cart

Your Cart is empty