..one stop store for your needs
delivering trust

Solar Radiation Sensor

Product Code:12056

Solar radiation sensor is used to measure the short-wave radiation(in the wavelength range of 400-1100nm) of the sun.It uses a silicon photodetector to generate a voltage output signal proportional to the incident light.In order to reduce the cosine error, a cosine corrector is installed in the instrument.

Key Features

Compliance with WMO World Meteorological Organization specifications
Spectral range?0-2000W/m2
Wavelength range?400-1100nm
Output: Analog Voltage/ RS485

Temperature+Humidity Sensor

Product Code:12025

This sensor incorporates a capacitive sensor for environmental relative humidity and a band gap sensor for environmental temperature in the same package that permit to measure accurately both parameters.

Key Features

Communication: Digital (two wire interface)
Temp Measurement range: -40ºC ~ +123.8ºC
Humidity Measurement range: 0 ~ 100%RH
Temp Accuracy: ±0.4ºC (range 0ºC ~ +70ºC), ±4ºC (range -40 ~ +125ºC)
Humidity Accuracy: ±1.8%RH

LiDAR Traffic Sensor with IP67 Enclosure

Product Code:12035

Packaged in a weatherproof housing, the powerful Leddar T16 Traffic Sensor is specifically designed for traffic management systems from city to highway applications. It offers cost-efficient and highly accurate vehicle detection for various Intelligent Transportation System (ITS) applications, such as free-flow electronic tolling, traffic monitoring and traffic law enforcement.

Key Features

Robust solid-state flash LiDAR design
Measurement rate of 200Hz for high-speed vehicle detection
Fully IP addressable; Single Cat 5e Ethernet cable
IP67 weatherproof enclosure
Detection range up to 75 m (246 ft.)


Pressure-sensitive force Sensor

Product Code:12027

The sensor is a pressure-sensitive resistive sensor. Resistance between the two ends of the terminals varies depending on the force exerted on the circular end of the sensor

Key Features

Measurement range: 0 ~ 25lb (11.34kg)
Resistance range: 5000 ~ 20kΩ
Length: 203mm Width: 14mm
Operating temperature: -9ºC ~ 60ºC
Response time: < 5 microseconds

Bend Sensor

Product Code:12028

This is a resistive sensor whose conductivity increases when folded. Its initial resistance is 200kΩ and can be reduced to about 50kΩ depending on the angle and degree of fold, allowing it to be used in applications such as movement detection relating to pieces or impact

Key Features

Resistance range: 50 ~ 200kΩ
Length: 11.43cm
Width: 0.95cm
Thickness: 0.096cm

Vibration Sensor

Product Code:12029

These are piezoelectric laminates which generate voltage at its output when subjected to a distortion. This therefore makes it useful as a system to measure vibrations caused by acceleration, knocks or contact, being especially useful in low consumption applications as they do not need power voltage for their operation

Key Features

Length: 2.41cm
Width: 1.30cm
Operating temperature: -15ºC ~ +60ºC
Storage temperature: -40ºC ~ +60ºC
Sensitivity: 10mV/microstrain

Current Sensor, 5A

Product Code:12031

Based on ACS721 current module, it can measure AC/DC current up to 5A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. Outputs is analog voltage which can be read using simple microcontroller ADC

Key Features

Measure Current Upto 5A
Supply Voltage: 4.5V~5.5V
Analog Output, proportional to AC or DC currents
Nearly zero magnetic hysteresis

Solar UV Sensor

Product Code:12055

The Solar UV Sensor adopts the photoelectric detector to receive the ultraviolet wave electrical signal. This product is one kind of precision instruments which is used to measure the solar ultraviolet radiation from the atmosphere . It can provide information on the public concern: the UV index, UV erythema measuring, the effects of the UV on person health and UV special biology and chemistry.

Key Features

Spectral Range: 280-400 nm
Measuring Range: 0-400 mW/m2
Operating Voltage: DC-5V/12V/24V
Output: 4-20 mA/ Voltage: 0-5V/RS485

Single Segment LiDAR Module - LeddarONE

Product Code:12034

The LeddarOne sensor module is dedicated to single-point detection and precise distance measurements. This low-cost module integrates patented Leddar digital signal processing technology for reliable performance at distance ranges up to 40 m.

Key Features

Detection range 0 to 40 meters (130 ft)
Accuracy 5 cm
Operating temperature range -40 degC to +85 degC
Distance precision 5 mm
Distance resolution 3 mm


Industrial grade 16-segment LiDAR module

Product Code:12036

Specifically designed for the industrial market, the Leddar IS16 is a robust, multi-segment flash LiDAR sensor that delivers consistent performance and reliability in the harshest conditions. With its weather-resistant enclosure, this solid-state LiDAR is perfectly suited to both outdoor and indoor applications.

Key Features

IP67 water-resistant enclosure
LCD and binary output configurations available
Detection range of up to 50 m
45 deg horizontal field of view
Proven reliability in harsh conditions


Your Shopping Cart

Your Cart is empty