THIN FILM HEAT FLUX SENSOR W/O ENCAPSULATION - SMALL
Product Code:12008Economically priced, yet highly reliable heat flux sensors. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc
Key Features
Available in various other dimensions
Very economical compared to other sensors in world market
Excellent Sensitivity
Compatible data loggers also available
THIN FILM HEAT FLUX SENSOR WITH ENCAPSULATION - SMALL
Product Code:12011Economically priced, yet highly reliable heat flux sensors. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc
Key Features
Available in various other dimensions
Very economical compared to other sensors in world market
Excellent Sensitivity
Compatible data loggers also available
Sensing Area:1" X 1"
Liquid(Oils/Combustibles) Level Sensor, Horizontal
Product Code:12012The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end
Key Features
Measurement Level: Horizontal
Liquids:Heavy Oils and Combustibles
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC
16-segment LiDAR sensor module
Product Code:12033The Leddar M16 sensor modules are advanced, solid-state LiDAR solutions that combine wide-beam flash illumination with 16 independent detection segments to simultaneously deliver rapid, continuous and precise detection and ranging for multiple objects along with excellent lateral discrimination
Key Features
Can detecting targets up to 146 m
Various beam options for optimized field of view
Rapid data acquisition rate of up to 100 Hz
Proven reliability both indoors and outdoors
Outstanding robustness, with no moving parts
Humidity Sensor
Product Code:12023The humidity sensor is an analog sensor which outputs voltage proportional to the relative humidity in the atmosphere
Key Features
Measurement range: 0 ~ 100%RH
Output signal: 0.8 ~ 3.9V (25ºC)
Accuracy: <±4%RH (a 25ºC, range 30 ~ 80%), <±6%RH (range 0 ~ 100)
Operation temperature: -40 ~ +85ºC
Response time: <15 seconds
Solar Radiation Sensor
Product Code:12056Solar radiation sensor is used to measure the short-wave radiation(in the wavelength range of 400-1100nm) of the sun.It uses a silicon photodetector to generate a voltage output signal proportional to the incident light.In order to reduce the cosine error, a cosine corrector is installed in the instrument.
Key Features
Compliance with WMO World Meteorological Organization specifications
Spectral range?0-2000W/m2
Wavelength range?400-1100nm
Output: Analog Voltage/ RS485
Temperature+Humidity Sensor
Product Code:12025This sensor incorporates a capacitive sensor for environmental relative humidity and a band gap sensor for environmental temperature in the same package that permit to measure accurately both parameters.
Key Features
Communication: Digital (two wire interface)
Temp Measurement range: -40ºC ~ +123.8ºC
Humidity Measurement range: 0 ~ 100%RH
Temp Accuracy: ±0.4ºC (range 0ºC ~ +70ºC), ±4ºC (range -40 ~ +125ºC)
Humidity Accuracy: ±1.8%RH
LiDAR Traffic Sensor with IP67 Enclosure
Product Code:12035Packaged in a weatherproof housing, the powerful Leddar T16 Traffic Sensor is specifically designed for traffic management systems from city to highway applications. It offers cost-efficient and highly accurate vehicle detection for various Intelligent Transportation System (ITS) applications, such as free-flow electronic tolling, traffic monitoring and traffic law enforcement.
Key Features
Robust solid-state flash LiDAR design
Measurement rate of 200Hz for high-speed vehicle detection
Fully IP addressable; Single Cat 5e Ethernet cable
IP67 weatherproof enclosure
Detection range up to 75 m (246 ft.)
Pressure-sensitive force Sensor
Product Code:12027The sensor is a pressure-sensitive resistive sensor. Resistance between the two ends of the terminals varies depending on the force exerted on the circular end of the sensor
Key Features
Measurement range: 0 ~ 25lb (11.34kg)
Resistance range: 5000 ~ 20kΩ
Length: 203mm Width: 14mm
Operating temperature: -9ºC ~ 60ºC
Response time: < 5 microseconds
Bend Sensor
Product Code:12028This is a resistive sensor whose conductivity increases when folded. Its initial resistance is 200kΩ and can be reduced to about 50kΩ depending on the angle and degree of fold, allowing it to be used in applications such as movement detection relating to pieces or impact
Key Features
Resistance range: 50 ~ 200kΩ
Length: 11.43cm
Width: 0.95cm
Thickness: 0.096cm